Garage tool 09
Setup sheet
Suspension settings, electronics, jetting and flash codes, read off your bike's own manual.
The weight only marks the rows the manual prints for it. It is not saved or sent anywhere.
Pick a bike.
31 bikes on file: 27 with suspension settings, 20 with electronics, 9 with jetting tables, 14 with flash codes.
How the setup sheet works
Every value on it is printed in that bike's owner's manual and is shown the way the manual prints it, with the page. Nothing is converted, rounded or reworded, and where a manual prints nothing the sheet shows nothing.
The manuals do not all print the same things. KTM, Husqvarna and GasGas print three sets of clicker settings (Comfort, Standard, Sport), the shock spring and fork air pressure by rider weight, and flash codes; their 50, 65 and 85 print carburetor tables by altitude and temperature. Yamaha prints the standard clicker positions, the optional springs and its own chart of symptoms and what to check. Honda's owner's manual prints the electronics and sends suspension settings to a separate Competition Handbook, which is not on file yet.
The tool gives no tuning advice of its own. Where a symptom chart is shown, it is the maker's, copied from the manual. Torque values are deliberately not published.
Only bikes whose manual has been read for this are listed. To check sag with a tape measure, use the sag tool.